| High-tensile steels – Stretch limit 690 – 1100 (as per EN 10025-6 bzw. Material Specification) |
|||||
|---|---|---|---|---|---|
| Qualities | Material No. | Thicknesses (mm) | Widths (mm) | Lengths (mm) | Inspection certificates acc. to DIN EN 10204 |
| S690QL/QL1 | 1.0976 | 3 – 250 | 1.000 – 3.000 | bis 14.000 | 3.2 DNV GL, 3.2 ABS, 3.1 |
| Alform 700M | 1.0980 | 8 – 60 | 1.000 – 3.000 | bis 12.000 | 3.1 |
| S960QL | 1.0982 | 4 – 120 | 1.000 – 3.000 | bis 12.000 | 3.1 |
| S1100QL | 1.8974 | 4 – 15 | 1.000 – 2.500 | bis 12.000 | 3.1 |
We supply optimised materials exceeding the standards to fulfil your orders:
- S690QL1 with notch impact test at -60 °C
- Test certificates 3.2 DNV GL and 3.2 ABS for S690QL/QL1
- In S690QL1/QL material thicknesses up to 250 mm and intermediate thicknesses: 7 and 9 mm in stock
- Alform 700M (quarto plate) in thicknesses: 8 – 60 mm
- Plate in S960QL and S1100QL up to 16 mm wall thickness, with tolerances compliant with telescopic boom rules
- Available wall thicknesses in S960QL and S1100QL: 4.5; 5.5; 6.5; 7; 8.5 and 9.5 mm
- Thicknesses 2 – 15 mm
- Lengths 6.000, 8.000, 10.000 und 12.000 mm
- Toughness up to -40 ° C for thicknesses: 3 – 12 mm (proof by impact test from 6 mm)
| Thermomechanically rolled high yield strength steels for cold forming (as per EN 10149-2) | ||||
|---|---|---|---|---|
| Qualities | Thicknesses (mm) | Widths (mm) | Lengths (mm) | Inspection certificates acc. to DIN EN 10204 |
| S355MC | 2 – 25 | 1.000 – 3.050 | bis 12.000 | 3.1 |
| S420MC | 3 – 25 | 1.500 | bis 6.000 | 3.1 |
| S460MC | 2 – 25 | 1.000 – 2.000 | bis 6.000 | 3.1 |
| S700MC | 2 – 15 | 1.000 – 2.000 | bis 12.000 | 3.1 |